Key Prices for 01-08 ST's

All keys are cut on a computerized key machine to factory specs.

With Key Code:

$25 = chipped key, cut, shipped

I can NO LONGER get Key Code:

sorry

Duplicates:

Chipped Key = $25, key, cut, shipped

"Steel" (plain) Key = $5 + $3 shipping

I can do other automotive keys also. Not all, but a good many of them.

Other Locksmith services available by mail.

prices subject to change

FORD

Originate New Master Key:

Vehicle must be connected to Hickock NGS (Dealer) or (Locksmith)=T-Code, SDD, Code Seeker, MVP

Two ten minute delays are required for this device to erase existing key programming and allows the vehicle module to accept new key codes. Two new keys should be ready since the system requires a minimum of two keys for programming.

After the first two keys are programmed, additional keys can be entered individually by following the instructions for adding duplicate keys.

Adding Duplicate Keys (Requires two working keys)

1. Insert an existing key into the ignition cylinder.

2. Turn the ignition cylinder to on / run and back to OFF.

3. Remove the existing key and, within five seconds, insert a second key and turn it to on / run - then back OFF.

4. Insert the new key before ten seconds have elapsed and turn it to on / run.

Leave it on for one second and turn back to OFF.

5. The security light will be on for three seconds to indicate that the new key has been programmed properly.

2001 - production thru mid year job 1..keyblank= H72PT

2001 job2 - 2008….…..……keyblank= Strattec# 599114

This info is from "MY" locksmith books and other resoursces I have on file and these keyblanks are what I use in my locksmith business.